• Filter
  • Show:

Showing 193–208 of 294 results

  • PB-LS-128 Juniper Networks Link Services Pic 128 ML Bundle

    0 out of 5 0
    43,945.00

    PB-LS-128 Overview

    Juniper Networks Link Services Pic 128 ML Bundle
  • PB-LS-32 Juniper Networks Link Services Pic 32 ML Bundle

    0 out of 5 0
    21,985.00

    PB-LS-32 Overview

    PB-LS-32 receives incoming packets from the network and transmits outgoing packets to the network. During this process, each PB-LS-32 performs framing and high-speed signaling for its media type. Before transmitting outgoing data packets, the PB-LS-32 encapsulates the packets received from the FPCs.
  • PB-LS-4 Juniper Networks Link Services Pic 4 ML Bundles

    0 out of 5 0
    7,297.00

    PB-LS-4 Overview

    PB-LS-4 receives incoming packets from the network and transmits outgoing packets to the network. During this process, each PB-LS-4 performs framing and high-speed signaling for its media type. Before transmitting outgoing data packets, the PB-LS-4 encapsulates the packets received from the FPCs.
  • PB-MS-100-1 Juniper Networks Multiservices PIC Type 1 module

    0 out of 5 0
    28,095.00

    PB-MS-100-1 Overview

    The Juniper Networks Multiservices PICs (MS-PICs) are modules that supply hardware acceleration for an array of packet processing-intensive services. Today these services include stateful firewall, Network Address Translation (NAT), IPSec, anomaly detection, L2TP LNS, J-Flow accounting, Link Services, and tunnel services. This wide array of services enables service providers to secure their network infrastructure; to collect rich statistics for billing, capacity planning, and security purposes; and to deliver new revenue-generating services, all with a single module.
  • PB-MS-400-2 Juniper Networks Multiservices PIC Type 2 expansion

    0 out of 5 0
    51,975.00

    PB-MS-400-2 Overview

    The Multiservices PIC significantly expands the services flexibility of the Juniper Networks M and T-series routers by enabling a broad range of services and applications in a single PIC form factor that can also serve are an integral part of a security solution. Stateful firewall, Network Address Translation (NAT), flow monitoring, and even elementary anomaly detection can be layered simultaneously on each MS-PIC - creating a rich, scalable "services plane". As a PIC platform, the MS-PIC's flexible architecture and silicon innovation provides high-performance service processing which is extensible to a variety of applications.
  • PB-TUNNEL Juniper Networks Tunnel Services PIC network upgrade kit

    0 out of 5 0
    27,985.00

    PB-TUNNEL Overview

    Juniper Networks Tunnel Services PIC The Tunnel Services PIC leverages a comprehensive set of tunneling technologies to deliver revenue-generating IP/MPLS services over any IP infrastructure
  • PE-1GE-SFP Juniper Networks expansion module

    0 out of 5 0
    13,375.00

    PE-1GE-SFP Overview

    Juniper Networks expansion module
  • PE-2EIA530 Juniper Networks EIA-530 Serial Physical Interface Card

    0 out of 5 0
    6,045.00

    PE-2EIA530 Overview

    The EIA-530 Serial Physical Interface Card (PIC) provides a cost-effective solution for enterprise WANs and ISPs who need to establish connectivity between Juniper Networks M-series routers and network devices with EIA-530 interfaces. Juniper Networks also offers conversion cables that work with the EIA-530 Serial PIC to enable X.21 and V.35 serial interfaces. The EIA-530 PIC is an excellent choice for mission-critical applications that require dependable serial interfaces. Offering hardware flexibility and adaptability for various applications, the EIA-530 Serial PIC provides connectivity to a wide range of synchronous equipment at data transfer rates of up to 16Mbps.
  • PE-2OC3-SON-SFP Juniper Physical Interface Card expansion module

    0 out of 5 0
    10,179.00

    PE-2OC3-SON-SFP Overview

    The Juniper Networks Multi-Rate SONET/SDH PICs product family is a suite of SONET/SDH interface modules that supports rich packet processing, multiple IP services, and uncompromising performance while offering market-leading port density and flexibility. These modules provide IP-over-SONET/SDH optical connectivity to backbone and access circuits.
  • PE-4DS3-ATM2 Juniper Networks ATM2 IQ Physical 4-port Interface Card

    0 out of 5 0
    21,575.00

    PE-4DS3-ATM2 Overview

    Supported by both the Juniper Networks M-series and T-series routers, the ATM2 Intelligent Queuing (IQ) PICs are available in 4-port DS3, 2-port and 4-port E3, 2-port OC-3, 1-port OC-12, and 2-port OC-12 versions. The ATM2 IQ PICs leverage the JUNOS operating system's MPLS traffic engineering and hardware-based QoS capabilities to deliver seamless transport of multiservice traffic over the IP/MPLS infrastructure. Designed to provide rich, granular ATM QoS and signaling functionalities, the ATM2 IQ PICs are a key element in the delivery of a guaranteed high-quality, end-to-end user experience.
  • PE-4DS3-E3-IQE-BNC Juniper Non-Channelized DS3 IQ-E Interface Card

    0 out of 5 0
    19,985.00

    PE-4DS3-E3-IQE-BNC Overview

    4-Port Non-Channelized DS3 / Non-Channelized E3 Enhanced IQ PIC, 75 ohm BNC. Requires 10.2R1 or later; Supported on Enhanced CFEB only.
  • PE-4OC3-1OC12-SON-SFP Juniper Network PIC Module

    0 out of 5 0
    24,345.00

    PE-4OC3-1OC12-SON-SFP Overview

    Juniper Network PIC Module
  • PE-8FE-FX Juniper 8- Port Fast Ethernet PIC Module

    0 out of 5 0
    23,465.00

    PE-8FE-FX Overview

    Juniper Network 8- Port Fast Ethernet PIC Module
  • PE-LS-128 Juniper Networks Link Services Pic 128 ML Bundle

    0 out of 5 0
    43,945.00

    PE-LS-128 Overview

    Juniper Networks Link Services Pic 128 ML Bundle
  • PE-LS-32 Juniper Networks Link Services Pic 32 ML Bundle

    0 out of 5 0
    21,985.00

    PE-LS-32 Overview

    The PE-LS-32 LS Physical Interface Card provides simultaneous support for three separate capabilities, enhanced Multilink bundling, tunneling, and link fragmentation and interleaving (LFI). Supported by the M5, M7i and M10i routers, the Link Services PIC can be combined with other IP Services PICs to enhance platform functionality.
  • PE-MS-100-1 Juniper Networks Multi services PIC Type 1 module

    0 out of 5 0
    19,165.00

    PE-MS-100-1 Overview

    The Juniper Networks Multiservices PICs (MS-PICs) are modules that supply hardware acceleration for an array of packet processing-intensive services. Today these services include stateful firewall, Network Address Translation (NAT), IPSec, anomaly detection, L2TP LNS, J-Flow accounting, Link Services, and tunnel services. This wide array of services enables service providers to secure their network infrastructure; to collect rich statistics for billing, capacity planning, and security purposes; and to deliver new revenue-generating services, all with a single module.