• Filter
  • Show:

Showing 289–294 of 294 results

  • SRX5K-SCB3 Juniper Switch Control Board switch plug-in module

    0 out of 5 0
    14,619.00

    SRX5K-SCB3 Overview

    The SRX5K-SCB3 (SCB3) caters to high-end security markets requiring support for higher capacity traffic, greater interface density (slot and capacity scale), and improved services. The SCB3 is supported on SRX5400, SRX5600, and SRX5800 Services Gateways.
  • SRX5K-SCB3-R Juniper Networks Switch Control Board switch module

    0 out of 5 0
    14,619.00

    SRX5K-SCB3-R Overview

    The SRX5K-SCB3 (SCB3) caters to high-end security markets requiring support for higher capacity traffic, greater interface density (slot and capacity scale), and improved services. The SCB3 is supported on SRX5400, SRX5600, and SRX5800 Services Gateways.
  • SRX5K-SCBE Juniper SRX Series Enhanced Switch Control Board

    0 out of 5 0
    32,300.00

    SRX5K-SCBE Overview

    The SRX5000 line enhanced Switch Control Board (SRX5K-SCBE) caters to high-end security markets requiring support for higher capacity traffic. The SRX5K-SCBE provides greater interface density (slot and capacity scale) and improved services.
  • SRX5K-SPC-4-15-320 Juniper SRX 5000 Services card

    0 out of 5 0
    163,169.00

    SRX5K-SPC-4-15-320 Overview

    As the "brain" behind the SRX services gateway, the SPCs are designed to process all available services on the gateway. Without the need for dedicated hardware for specific services or capabilities, there are no instances in which a piece of hardware is taxed to the limit while other hardware is sitting idle. All of the processing capabilities of the SPCs are designed to process all configured services on the gateway.
  • SRX5K-SPC3 Juniper Networks SRX 5000 Services processing card

    0 out of 5 0
    170,245.00

    SRX5K-SPC3 Overview

    The SRX5K-SPC3 Services Processing Card (SPC) contains two Services Processing Units (SPUs) with 128GB of memory per SPU, that provide the processing power to run integrated services such as firewall, IPsec, and IDP. All traffic traversing the services gateway is passed to an SPU to have services processing applied to it. Traffic is intelligently distributed by I/O cards (IOCs) to SPUs for services processing.
  • TCX1000-2D8CMD Juniper TCX1000 2D 8 Channel MUX/Demux

    0 out of 5 0
    2,845.00

    TCX1000-2D8CMD Overview

    The TCX1000-2D8CMD is a standalone C-Band two-degree eight channel colorless passive multiplexer/ demultiplexer. It is a rack-mounted module that is installed alongside the TCX1000-RDM20. Each module combines the signals at eight channel input ports (C0 to C7IN ports) and broadcasts the multiplexed signals out of two Line-side direction ports (L0 OUT and L1 OUT) ports. The module also combines the signals at the two Line-side input ports (L0 IN and L1 IN ports) and broadcasts the demultiplexed signals out of eight channel output ports (C0 to C7OUT ports).