GLC-FE-100LX Overview
Manufacturer Part Number GLC-FE-100LX Product Name 100BASE-LX10 SFP Type SFP Application/Usage Data Networking Interfaces/Ports 1 x 100Base-LX10
GLC-FE-100LX-RGD Overview
The GLC-FE-100LX-RGD is a third-party compatible SFP for Cisco. This 100BASE module will reach 10km and uses a wavelength of 1310nm. All GLC-FE-100LX-RGD are in-system tested in real Cisco routers and switches.
GLC-GE-100FX Overview
GLC-GE-100FX Cisco 100B-FX SFP Module LC Connector.
GLC-GE-100FX= Overview
GLC-GE-100FX= Cisco 100B-FX SFP Module LC Connector.
GLC-LH-SM Overview
GLC-LH-SM Cisco 1Gbps 1000Base-LX/LH Single-Mode Fiber 10km 1310nm Duplex LC Connector SFP Transceiver Module
GLC-LX-SM-RGD= Overview
GLC-LX-SM-RGD is the Cisco SFP - GLC-LX-SM-RGD, 1000Mbps Single Mode Rugged SFP. The industry-standard Cisco Small Form-Factor Pluggable (SFP) Gigabit Interface Converter is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network.
GLC-SX-MM= Overview
The 1000BASE-SX SFP, compatible with the IEEE 802.3z 1000BASE-SX standard, operates on legacy 50 μm multimode fiber links up to 550 m and on 62.5 μm Fiber Distributed Data Interface (FDDI)-grade multimode fibers up to 220 m. It can support up to 1km over laser-optimized 50 μm multimode fiber cable.
GLC-ZX-SM-RGD Overview
The GLC-ZX-SM-RGD is a third-party compatible SFP for Cisco. This 1000BASE module will reach 550m / 1km and uses a wavelength of 850nm. All GLC-ZX-SM-RGD are in-system tested in real Cisco routers and switches.
GLC-ZX-SMD Overview
Cisco GLC-ZX-SMD is a 1000BASE-ZX SFP for Long-Reach Single-Mode Fiber. The 1000BASE-ZX SFP operates on standard single-mode fiber-optic link spans of up to approximately 70 km in length. The SFP provides an optical link budget of 21 dB, but the precise link span length depends on multiple factors such as fiber quality, number of splices, and connectors.When shorter distances of single-mode fiber (SMF) are used, it might be necessary to insert an inline optical attenuator in the link to avoid overloading the receiver. A 10-dB inline optical attenuator should be inserted between the fiber-optic cable plant and the receiving port on the SFP at each end of the link whenever the fiber-optic cable span loss is less than 8 dB.
iSFP-100-MM Overview
Alcatel-Lucent Industrial Multi mode fiber, up to 500m, LC connector
iSFP-100-SM15 Overview
Alcatel-Lucent Industrial Single mode fiber, up to 15km, LC connector
iSFP-100-SM40 Overview
Alcatel-Lucent Industrial Single mode, up to 40km, LC connector
iSFP-10G-LR Overview
Alcatel-Lucent 10GBase-LR SFP+ Optical Transceiver, 1310nm 10km
iSFP-10G-SR Overview
Alcatel-Lucent Industrial 10GBase-SR SFP+ Optical Transceiver, 850nm 300m
`
iSFP-GIG-LH40 Overview
Alcatel-Lucent Industrial Single mode over 1310nm wavelength, up to 40km
iSFP-GIG-LH70 Overview
Alcatel-Lucent Industrial Single mode over 1550nm wavelength, up to 70km