-
In Stock
Cisco ASR1000-2T+20X1GE
Cisco ASR 1000 Fixed Ethernet Line Card, 2x10GE + 20x1GE -
In Stock
Cisco ASR1000-ESP10
The Cisco ASR1000 10-GBps Embedded Services Processor (ESP) is a control Processor that provides centralized forwarding-engine options for the Cisco ASR 1000 Series Aggregation Services Routers. The 10-GBps ESP (ESP10) supports up to 10 gigabits per second of bandwidth and can be deployed in customer networks that require 1 + 1 redundancy when paired with the Cisco ASR 1006 Router chassis. Based on the innovative Cisco QuantumFlow Processor (QFP) for next-generation forwarding and queuing in silicon, the ESP10 delivers multi-gigabit Cisco IOS Firewall capability in a router without the need for service blades. Other features include: hardware-assisted quality of service (QoS), hardware-based encryption, and latency-minimizing multicast packet replication. -
In Stock
Cisco ASR1000-ESP10-N
The Cisco ASR 1000 Series ESPs are responsible for the data-plane processing tasks, and all network traffic flows through them. The modules perform all baseline packet routing operations, including MAC classification, Layer 2 and Layer 3 forwarding, quality-of-service (QoS) classification, policing and shaping, security access control lists (ACLs), VPNs, load balancing, and NetFlow. They are also responsible for features such as firewalls, intrusion prevention, Network Based Application Recognition (NBAR), Network Address Translation (NAT), and flexible pattern matching. -
In Stock
Cisco ASR1000-ESP100
Cisco ASR1000-ESP100 Processing Module -
In Stock
Cisco ASR1000-ESP20
The Cisco ASR 1000 Series 20-Gbps Embedded Services Processor (ESP) is based on the innovative Cisco QuantumFlow Processor for next-generation forwarding and queuing in silicon. The Cisco ASR 1000 Series ESP is responsible for data-plane processing tasks, and all network traffic flows through them, enhancing a range of advanced services from service provider broadband and edge services to enterprise-level WAN aggregation and IP gateway services. -
In Stock
Cisco ASR1000-ESP200
Cisco ASR 1000 Embedded Services Processor 200Gbps -
In Stock
Cisco ASR1000-ESP40
The Cisco ASR1000-ESP40 forwarding performance will vary depending on features configured. Up to 4 Mpps for the combination of the following commonly-used features: IPv4 forwarding, IP Multicast, ACL, QoS, Reverse Path Forwarding (RPF), load balancing, and Sampled NetFlow.This is similar with the ASR1000-ESP40=. The ASR1000-ESP40= is a spare one. -
In Stock
Cisco ASR1000-ESP5
The Cisco forwarding performance will vary depending on features configured. Up to 4 Mpps for the combination of the following commonly-used features: IPv4 forwarding, IP Multicast, ACL, QoS, Reverse Path Forwarding (RPF), load balancing, -
In Stock
Cisco ASR1000-RP1
The Cisco ASR 1000 Series Route Processor 1 (RP1) addresses the route-processing requirements of carrier-grade IP and Multiprotocol Label Switching (MPLS) packet infrastructures. Not only does it provide advanced routing capabilities, but it also monitors and manages the other components in the Cisco ASR 1000 Series Aggregation Services Router. -
In Stock
Cisco ASR1000-RP2
The Cisco ASR 1000 Series Route Processors address the stringent route-processing requirements of carrier-grade IP and Multiprotocol Label Switching (MPLS) packet network infrastructures. They are the central control processors that run the network operating system, provide advanced routing capabilities, and also monitor and manage the other components of the Cisco ASR 1000 Series Aggregation Services Router. -
In Stock
Cisco ASR1000-RP3
Cisco ASR 1000 Series Route Processor 3 router plug-in module -
In Stock
Cisco ASR1000-SIP10
The Cisco ASR 1000 Series SIP helps enable high-performance, intelligent wide- and metropolitan-area network (WAN and MAN) services. Enterprises and service providers can take full advantage of the scalability and performance it offers, along with many options for WAN aggregation and connectivity that the SPA portfolio offers. The Cisco ASR 1000 Series SIP provides the physical termination for the SPAs and accepts up to four half-height and 2 full height Cisco SPAs, supporting Ethernet, ATM, Packet over SONET/SDH (PoS), and Serial interfaces. -
In Stock
Cisco ASR1000-SIP40-SB
Cisco ASR1000-SIP40 Interface Processor -
In Stock
ASR1001-2.5G-SECK9 Overview
The Cisco ASR 1000 Series provides a significant enhanced value compared to prior generations of Cisco midrange routing solutions by providing more than tenfold performance improvement with services running. Additionally, the routers have hardware and software redundancy, as well as an industry-leading high-availability design -
In Stock
ASR1001-2.5G-VPNK9 Overview
Get embedded services for enterprise and service provider networks in a small form factor of 1-rack unit (RU). The Cisco ASR 1001 Router offers a default system bandwidth of 2.5 Gbps. It houses one shared port adapter (SPA) slot that supports single-height SPAs. It includes four built-in Gigabit Ethernet ports. -
In Stock
ASR1001-2XOC3POS Overview
The Cisco ASR 1001 router is a small footprint edge routing solution that delivers high performance throughput with services turned on, enabling deployment agility in high-end enterprise branch, WAN edge, and managed services environments.