-
In Stock
Cisco CWDM-MUX8A
The 8-Channel Multiplexer/Demultiplexer (CWDM-MUX-8A) allows you to multiplex/demultiplex eight separate channels into one pair of fiber. Dual fiber is used for both the network connection and the CWDM GBIC or CWDM SFP transceiver connections. The eight available wavelengths are 1470-nm, 1490-nm, 1510-nm, 1530-nm, 1550-nm, 1570-nm, 1590-nm, and 1610-nm. The multiplexer/demultiplexer, is equipped with a monitor port that allows you to attach a power meter or an optical spectrum analyzer to assist you in monitoring and troubleshooting the network -
In Stock
Cisco CWDM-OADM1-1470
This CWDM OADM is passive device that can multiplex/demultiplex or add/drop wavelengths from multiple fibers onto one optical fiber. The OADM connectors are interfaced to the color-matching CWDM GBIC or CWDM SFP transceivers on the equipment side. -
In Stock
Cisco CWDM-OADM1-1510
This CWDM OADM is passive device that can multiplex/demultiplex or add/drop wavelengths from multiple fibers onto one optical fiber. The OADM connectors are interfaced to the color-matching CWDM GBIC or CWDM SFP transceivers on the equipment side. Single-wavelength OADM are equipped with two channels traveling different network paths (east and west) to offer redundancy or protection in rings. -
Cisco CWDM-OADM1-1530
EThe Dual Single-Channel OADMs (CWDM-OADM1-xxxx) allows you to add/drop two channels of the same wavelength into the two directions of an optical ring. The other wavelengths are passed through the OADM. The dual single-channel OADMs are transparent to the 1300-nm wavelength and includes a 1300-nm/1500-nm filter to mix legacy SONET/SDH/ATM ring installations with CWDM installations on the same optical fiber. Dual fiber is used for both the network and the CWDM GBIC and CWDM SFP connections.
-
Cisco CWDM-OADM1-1550
This CWDM OADM is passive device that can multiplex/demultiplex or add/drop wavelengths from multiple fibers onto one optical fiber. The OADM connectors are interfaced to the color-matching CWDM GBIC or CWDM SFP transceivers on the equipment side. Single-wavelength OADM are equipped with two channels traveling different network paths (east and west) to offer redundancy or protection in rings. -
Cisco CWDM-OADM1-1570
This CWDM OADM is passive device that can multiplex/demultiplex or add/drop wavelengths from multiple fibers onto one optical fiber. The OADM connectors are interfaced to the color-matching CWDM GBIC or CWDM SFP transceivers on the equipment side. Single-wavelength OADM are equipped with two channels traveling different network paths (east and west) to offer redundancy or protection in rings. -
In Stock
Cisco CWDM-OADM1-1590
Brand Name Cisco Product Model Product Name Dual single-channel 1590nm OADM Product Type Fiber Module Connectivity Media Single-mode -
In Stock
Cisco CWDM-OADM4-1
The 4-Channel OADM allows you to add/drop four channels (with different wavelengths) into one direction of an optical ring. The 4-channel OADMs are transparent to the 1300-nm wavelength and includes a 1300-nm/1500-nm filter to mix legacy SONET/SDH/ATM ring installations with CWDM installations on the same optical fiber. -
In Stock
Cisco CWDM-OADM4-2
Cisco Channels CWDM OADM Module (1550 1570 1590 16100).The Cisco ® WDM series comprises a set of 11 new CWDM passive modules mechanically compatible with the Cisco CWDM chassis (part number CWDM-CHASSIS-2=) and a 1300/1550 nm splitter cable. Compared to the previous 1000BASE-CWDM series of passive filters, this new set of devices sports a greatly reduced insertion loss (up to 50 percent), "power-tap" ports to allow live monitoring and troubleshooting of the CWDM signals, as well as the mixing of 1300-nm CWDM signals on the same fiber infrastructures. -
In Stock
Cisco EWDM-MUX8
The Cisco enhanced wavelength-division multiplexing EWDM-MUX8) product allows users to scale the speed and capacity of the services offered in a coarse wavelength-division multiplexing (CWDM) network by offering the ability to insert up to 8 dense wavelengthdivision multiplexing (DWDM) wavelengths to the existing 8-wavelength CWDM channel plan. -
In Stock
Cisco EWDM-OADM4
Cisco 4-Channels EWDM OADM Module; allows to add/drop Four Channels with different wavelengths and combine them with up to 8 CWDM channels into one pair of fiber.The four-channel and two-channel OADM ( and EWDM-OADM2=) allows you to respectively add/drop four or two channels (with different wavelengths) and combine them with up to 8 CWDM channels into one pair of fiber. Dual fiber is used for both the network connection and the transceiver connections. The two OADMs are equipped with a port that allows you to connect to the booster amplifier and support the following wavelengths: •EWDM-OADM4—1542.94 nm, 1542.14 nm, 1540.56 nm, 1539.77 nm. •EWDM-OADM2—1560.61 nm, 1559.79 nm. -
In Stock
Cisco FAN-T3-F=
Product Details Fan unit for Catalyst 3850-12 3850-12X48 3850-16 3850-24 3850-32 3850-48 -
In Stock
Cisco FAN-T3-R=
Network device fan module for Catalyst 3850-12 3850-12X48 3850-16 3850-24 3850-32 3850-48 -
In Stock
Cisco FAN-T4-R
Main Features Fan unit for Catalyst 9500 -
In Stock
Cisco MA-ANT-25
Antenna 8 dBi 6.5 dBi directional outdoor wall-mountable pole mount indoor for Cisco Meraki MR62 MR66 MR72 MR74 MR84 The Meraki MA-ANT-25 patch antenna is an 8/6.5 dBi, 2x2 MIMO, dual-band 2.4/5GHz antenna providing client coverage over focused areas. It is designed for use with Meraki APs with N-type connectors. -
In Stock
Cisco MA-FAN-16K
Fan unit for Cloud Managed MS350-24 MS350-24P MS350-48 MS350-48FP MS350-48LP