QFX5210-64C-AFI Juniper Networks QFX5210-64C switch

39,215.00

QFX5210-64C-AFI Overview

The QFX5210 is a flexible fixed-configuration switch designed for spine-and-leaf applications in modern IP fabric networks. It allows network operators to build large, high-density IP fabrics that support network virtualization and intelligent traffic forwarding based on proven, Internet-scale technology.

QFX5210-64C-AFI Technical Specifications

Juniper Networks QFX Series QFX5210-64C switch 64 ports managed rack mountable

Manufacturer :Netscreen
Brand :Juniper, Juniper Networks
Product Line :Juniper Networks QFX Series
Model :QFX5210-64C
Packaged Quantity :1
Chassis
Airflow Direction :Back to front airflow
Built-in Devices :100 GB SSD
Processor
Installed Qty :1
Manufacturer :Intel
Clock Speed :2.2 GHZ
RAM
Technology :DDR4 SDRAM
Installed Size :16 GB
Flash Memory
Installed Size :100 GB
Performance
Performance :Forwarding capacity: up to 4.2 Bpps, Switching throughput: up to 12.8 Tbps
Capacity
Capacity :GRE tunnels: 2040, IPv6 host table capacity: 102339, IPv6 route capacity: 172016, IPv4 route capacity: 262140, MPLS IPv4 L3 VPNs: 2048, Firewall ingress filters(RACL, VACL, PACL rules): 768, Maximum member ports per LAG: 64, Maximum number of mirroring sessions: 4, Mirroring destination VLANs per switch: 4, LAG groups: 64, VLAN IDs: 4096, QoS hardware queues per port: 10, Firewall egress filters(RACL, VACL, PACL rules): 1024, IPv4 host table capacity: 204750, VSTP instances: 509, ARP entries: 49000, MPLS labels: 32000, MSTP instances: 64, Mirroring destination ports per switch: 4
Networking
Type :Switch
Subcategory :Network hubs and switches
Subtype :100 Gigabit Ethernet
Form Factor :Rack-mountable
Ports Qty :64
Advanced Switching :Layer 3
Routing Protocol :BGP, PIM-SM, PIM-SSM, RIP-2, Static IP routing, MPLS, RIP-1, GRE, IGMPv2, IGMP, MLD, IS-IS, OSPFv2, OSPF, VRRP, MLDv2, OSPFv3, URPF
MAC Address Table Size :264K entries
Jumbo Frame Support :9216 bytes
Manageable :Yes
Remote Management Protocol :SSH, SNMP 3, Telnet, CLI, SSH-2, SNMP 1, SNMP 2
Features :Weighted Random Early Detection (WRED), DHCP relay, Smoothed Deficit Weighted Round Robin (SDWRR), MPLS VPN, Spanning Tree Protocol (STP) support, Quality of Service (QoS), VLAN trunking, Access Control List (ACL) support, Bidirectional Forwarding Detection (BFD), Loop-free alternate (LFA), Filter-based forwarding (FBF), Q-in-Q tunneling, Switched Port Analyzer (SPAN), BPDU Guard, Port-based VLAN, High Availability, Rapid Spanning Tree Protocol (RSTP) support, Uplink Failure Detection (UFD), MAC address filtering, IPv6 support, DHCP snooping, VPN support, Data Center Bridging (DCB), Zero-touch provisioning (ZTP), Multiple Spanning Tree Protocol (MSTP) support, IGMP snooping, Loop prevention, Priority-Based Flow Control (PFC), Routed VLAN Interface (RVI), VLAN support, Denial of Service (DoS) protection, MPLS support, VLAN Spanning Tree Protocol (VSTP), Root Guard, IGMP querier, Management Information Base (MIB), Firewall protection, ARP support, MLD snooping, Redundant trunk group (RTG), sFlow v5, Storm Control, Multichassis link aggregation (MC-LAG), Back to front airflow, Remote Switch Port Analyzer (RSPAN), Redundant hot swappable fans, Multicast Source Discovery Protocol (MSDP), Low-latency queuing (LLQ), Encapsulated Remote SPAN (ERSPAN), 42MB packet buffer, IGMP proxy
Compliant Standards :IEEE 802.1p, IEEE 802.1ad, IEEE 802.1w, IEEE 802.3ad (LACP), IEEE 802.1ab (LLDP), IEEE 802.3x, IEEE 802.1Q, IEEE 802.1D, IEEE 802.1s, IEEE 802.1Qbb
Ports
Qty :64
Type :100 Gigabit QSFP28 / 40 Gigabit QSFP+
Interface Provided
Interfaces :64 x 100Gbit LAN QSFP28/QSFP+ (breakout compatible), 1 x USB Type A, 1 x management RJ-45, 1 x console RJ-45
Software
Type :Junos OS
Power Device
Type :Internal power supply
Hot-Plug :Hot-plug
Power Redundancy :Yes
Power Redundancy Scheme :1+1
Installed Qty :2
Power Provided :850 watt
Nominal Voltage :AC 120/230 V
80 PLUS Certification :80 PLUS Silver
Miscellaneous
Color Category :Gray
Height (Rack Units) :2
Authentication Method :RADIUS, Secure Shell v.2 (SSH2), Secure Shell (SSH), TACACS+
Compliant Standards :CISPR 22 Class A, EN 55032, ETSI EN 300 019-2-1, ICES-003, WEEE, CISPR 32 Class A, FCC CFR47 Part 15 A, KN35, BSMI CNS 13438, REACH, ETSI EN 300 019, UL 60950-1 Second Edition, EN 300 386, AS/NZS CISPR 32 Class A, ETSI, ETSI EN 300 019-2-3, CAN/CSA-C22.2 No. 60950-1, EN55024, CISPR 24, KN32, GR-63-CORE, IEC 60950-1:2005 + A1:2009 + A2:2013, EN/ETSI 300 753, EN 61000-3-2, China RoHS, RoHS 6/6, VCCI-CISPR 32:2016 Class A, ETSI EN 300 019-2-2, EN55022, EN 61000-3-3
Dimensions & Weight
Width :17.3 inch
Depth :24.1 inch
Height :3.5 inch
Weight :31.08 lbs
Environmental Parameters
Min Operating Temperature :32 degree Fahrenheit
Max Operating Temperature :104 degree Fahrenheit
Min Storage Temperature :-40 degree Fahrenheit
Max Storage Temperature :158 degree Fahrenheit
Humidity Range Operating :5 – 90% (non-condensing)
Humidity Range Storage :5 – 95% (non-condensing)

Reviews

There are no reviews yet.

Be the first to review “QFX5210-64C-AFI Juniper Networks QFX5210-64C switch”

Your email address will not be published. Required fields are marked *

QFX5210-64C-AFI Juniper Networks QFX5210-64C switch
39,215.00