QFX5110-32Q-AFI Juniper Networks QFX5110-32Q switch

41,065.00

QFX5110-32Q-AFI Overview

The high-performance Juniper Networks QFX5110 line of Ethernet switches fit the bill, providing the foundation for dynamic data centers. As a critical enabler for IT transformation, the data center network supports cloud and SDN adoption, network virtualization, integrated/scale-out storage, and the rapid deployment and delivery of mission-critical applications that significantly increase east-west traffic within the data center. Furthermore, increasing demand for 100GbE spine ports is driving the need for 100GbE uplinks for all server access speeds, including 10GbE and 40GbE. The QFX5110 includes 100GbE uplinks, enabling it to support a diverse set of switching architectures, including fabric, Layer 3, and spine-and-leaf deployments, enabling users to easily adapt as requirements change over time.

QFX5110-32Q-AFI Technical Specifications

Juniper Networks QFX Series QFX5110-32Q switch 32 ports managed rack mountable

Manufacturer :Netscreen
Brand :Juniper, Juniper Networks
Product Line :Juniper Networks QFX Series
Model :QFX5110-32Q
Packaged Quantity :1
Chassis
Airflow Direction :Back to front airflow
Built-in Devices :64 GB SSD
Processor
Installed Qty :1
Manufacturer :Intel
Clock Speed :1.8 GHZ
RAM
Installed Size :16 GB
Performance
Performance :Switching capacity: 2.56 Tbps, Latency: 550 ns, Switching capacity: 1.44 Bpps
Capacity
Capacity :IPv4 routes (Unicast): 128000, VLAN Spanning Tree Protocol instances: 253, LAG groups: 104, Maximum member ports per LAG: 32, VSTP instances: 253, QoS hardware queues per port: 12, Multiple Spanning Tree Protocol instances: 64, Virtual interfaces (VLANs): 4093, IPv6 routes (Unicast): 84000, Equal-Cost Multipathing (ECMP) ways: 64, IPv4 routes (Multicast): 104000, IPv4 hosts: 208000, IPv6 routes (Multicast): 52000, ARP entries: 48000
Networking
Type :Switch
Subcategory :Network hubs and switches
Subtype :40 Gigabit Ethernet
Form Factor :Rack-mountable
Ports Qty :32
Fibre Channel :FC-BB-5
Advanced Switching :Layer 3
Routing Protocol :IGMPv2, IGMPv3, Static IPv4 routing, MSDP, OSPF, CIDR, RIP-2, VRRP, IGMP, BGP-4, PIM-SM, IS-IS, Bidirectional Forwarding Detection (BFD), RIP, OSPFv2, MPLS, ECMP, BGP
MAC Address Table Size :288K entries
Jumbo Frame Support :9216 bytes
Manageable :Yes
Remote Management Protocol :SSH, RMON, SNMP 2, TFTP, SNMP 3, SNMP 1, Telnet, CLI
Features :Dynamic ARP Inspection (DAI), Cut-through, Class of Service (CoS), DHCP server, MAC address filtering, Flow control, VLAN support, Spanning Tree Protocol (STP) support, Data Center Bridging (DCB), Data Center Bridging Exchange (DCBX) support, VPN support, High Availability, Trunking, Low-latency queuing (LLQ), Redundant hot swappable fans, 16 MB shared buffer, BOOTP support, FCoE Initialization Protocol (FIP), Strict Priority Queuing (SPQ), IPv6 support, Weighted Random Early Detection (WRED), sFlow v5, DHCP snooping, Quality of Service (QoS), IP source guard, Enhanced transmission selection, Redundant trunk group (RTG), FCoE forwarding, View-based Access Control Model (VACM), Back to front airflow, Non-Stop Routing (NSR), RARP support, Store and forward, Non-Stop Bridging (NSB), IGMP snooping, IPv4 support, Management Information Base (MIB), VLAN Spanning Tree Protocol (VSTP), DHCP relay, SNTP support, Uplink Failure Detection (UFD), Tunneling
Compliant Standards :IEEE 802.1w, IEEE 802.1Qbb, IEEE 802.1ad, IEEE 802.1s, Shaped Deficit Weighted Round-Robin (SDWRR), IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1ab (LLDP), IEEE 802.1Qaz, IEEE 802.1p, IEEE 802.1D, IEEE 802.1Q
Ports
Qty :32
Type :40 Gigabit QSFP+
Ports (2nd)
Qty :4
Type :40 Gigabit / 100 Gigabit QSFP28
Interface Provided
Interfaces :32 x 40Gbit LAN QSFP+, 2 x management, 1 x USB 2.0 management, 4 x 100Gbit LAN QSFP28, 1 x serial (RS-232) management
Power Device
Type :Internal power supply
Hot-Plug :Hot-plug
Power Redundancy :Yes
Power Redundancy Scheme :1+1
Installed Qty :2
Max Supported Qty :2
Nominal Voltage :AC 120/230 V
Power Consumption Operational :340 watt
80 PLUS Certification :80 PLUS Silver
System Requirements
OS Required :JUNOS
Miscellaneous
Color Category :Gray
Rack Mounting Kit :Included
Height (Rack Units) :1
Authentication Method :TACACS+, RADIUS, Secure Shell (SSH), Secure Shell v.2 (SSH2)
Compliant Standards :EN55024, RoHS, CAN/CSA-C22.2 No. 60950-1, China RoHS, REACH, GR-1089-CORE, BSMI CNS 13438, AS/NZS CISPR32, EN 55032 Class A, WEEE, EN 300 386, CISPR 32 Class A, IEC 60950-1, CISPR 22 Class A, EN 60825-1, AS/NZS CISPR 22, ICES-003 Class A, CISPR 24, VCCI Class A, UL 60950-1, FCC CFR47 Part 15 A, GR-63-CORE, EN 55022 Class A, AS/NZS CISPR 32
Dimensions & Weight
Width :17.4 inch
Depth :20.5 inch
Height :1.7 inch
Weight :24.6 lbs
Environmental Parameters
Min Operating Temperature :32 degree Fahrenheit
Max Operating Temperature :104 degree Fahrenheit
Min Storage Temperature :-40 degree Fahrenheit
Max Storage Temperature :158 degree Fahrenheit
Humidity Range Operating :5 – 90% (non-condensing)
Humidity Range Storage :0 – 95% (non-condensing)

Reviews

There are no reviews yet.

Be the first to review “QFX5110-32Q-AFI Juniper Networks QFX5110-32Q switch”

Your email address will not be published. Required fields are marked *

QFX5110-32Q-AFI Juniper Networks QFX5110-32Q switch
41,065.00