QFX3500-ACRB-BNDL Juniper Networks QFX3500 Switch

QFX3500-ACRB-BNDL Technical Specifications

Juniper Networks QFX Series QFX3500 Switch managed rack mountable

Manufacturer :Netscreen
Brand :Juniper, Juniper Networks
Product Line :Juniper Networks QFX Series
Model :QFX3500 Switch
Packaged Quantity :2
Chassis
Airflow Direction :Back to front airflow
Built-in Devices :Status LCD
Performance
Performance :Switching capacity: 960 Mbps, Throughput: 1.28 Tbps
Capacity
Capacity :IPv4 routes: 8000, Multiple Spanning Tree Protocol instances: 64, Layer 2 multicast groups: 3500, Virtual interfaces (VLANs): 4095, Firewall policies: 1500, VLAN Spanning Tree Protocol instances: 253
Networking
Type :Switch
Subcategory :Network hubs and switches
Subtype :10 Gigabit Ethernet
Form Factor :Rack-mountable
Advanced Switching :Layer 3
Routing Protocol :PIM-SM, CIDR, OSPF, Bidirectional Forwarding Detection (BFD), ECMP, IGMP, IGMPv2, IS-IS, BGP-4, RIP-2, MSDP, RIP, OSPFv2, VRRP, IGMPv3, BGP
MAC Address Table Size :120000 entries
Jumbo Frame Support :9216 bytes
Manageable :Yes
Remote Management Protocol :SNMP 3, CLI, SSH, SNMP 2, SNMP 1, RMON
Features :Quality of Service (QoS), Redundant hot swappable fans, Direct cable connection support, Dynamic ARP Inspection (DAI), Management Information Base (MIB), Flow control, Weighted Random Early Detection (WRED), VLAN support, Store and forward, Spanning Tree Protocol (STP) support, DoS attack prevention, Data Center Bridging (DCB), sFlow v5, Back to front airflow, FCoE forwarding, BOOTP support, Static routing, Data Center Bridging Exchange (DCBX) support, LACP support, Trivial File Transfer Protocol (TFTP) support, RARP support, DHCP server, Low-latency queuing (LLQ), DHCP snooping, VLAN Spanning Tree Protocol (VSTP), ARP support, Multiple Spanning Tree Protocol (MSTP) support, 9MB packet buffer, IPv4 support, Cabling on rear panel, IGMP snooping, MAC address filtering, Firewall protection, DHCP relay
Compliant Standards :IEEE 802.3x, IEEE 802.1Q, IEEE 802.1Qbb, IEEE 802.1D, IEEE 802.1Qaz, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1p, IEEE 802.1Qau, IEEE 802.1ad, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.1Qbg, Shaped Deficit Weighted Round-Robin (SDWRR)
Ports
Qty :36
Type :1 Gigabit SFP/ 10 Gigabit SFP+
Ports (2nd)
Qty :4
Type :QSFP+ (breakout compatible)
Ports (3rd)
Qty :12
Type :10Gb Ethernet/2/4/8Gb Fibre Channel SFP+
Interface Provided
Interfaces :36 x 10GBase-X SFP+, 1 x RJ-45 management, 4 x QSFP+ (breakout compatible), 1 x USB Type A, 1 x console management, 12 x SFP+
Power Device
Type :Internal power supply
Hot-Plug :Hot-plug
Power Redundancy :Yes
Power Redundancy Scheme :1+1
Installed Qty :2
Max Supported Qty :2
Nominal Voltage :AC 120/230 V
Power Consumption Operational :365 watt
System Requirements
OS Required :JUNOS
Miscellaneous
Height (Rack Units) :1
Encryption Algorithm :AES, MD5
Authentication Method :Secure Shell (SSH), TACACS+, RADIUS, Secure Shell v.2 (SSH2)
Compliant Standards :UL 60950-1 Second Edition, CAN/CSA C22.2 No. 60950-1, FCC CFR47 Part 15, REACH, VCCI Class A, RoHS 6/6, EN 60950-1, CISPR 22, NEBS level 3, EN 60825-1, EN55022 Class A, WEEE, BSMI CNS 13438, GR-1089-CORE, IEC 60950-1, GR-63-CORE, CAN/CSA-C22.2 No. 60950-1
Dimensions & Weight
Width :17.3 inch
Depth :28 inch
Height :1.8 inch
Weight :30.75 lbs
Environmental Parameters
Min Operating Temperature :32 degree Fahrenheit
Max Operating Temperature :104 degree Fahrenheit
Min Storage Temperature :-40 degree Fahrenheit
Max Storage Temperature :158 degree Fahrenheit
Humidity Range Operating :5 – 90% (non-condensing)
Humidity Range Storage :0 – 95% (non-condensing)