Filter Products
Show:
MX150 Juniper Networks MX-series MX150 Router Rack Mountable
Add to wishlist Compare

MX150 Juniper Networks MX-series MX150 Router Rack Mountable

€15,699.00 Add to cart

MX150 Overview

The compact is a high-performance, feature-rich 40 Gbps edge router that is ideally suited for lower bandwidth service provider applications and distributed service architectures, and for enterprise WAN uses. With support for an outstanding mix of 10/100/1000 and 10GbE interfaces and a variety of integrated services, including IPsec, all in a single rack unit,
JNP10003-RE1 Juniper Networks Routing Engine and Control Board
Add to wishlist Compare

JNP10003-RE1 Juniper Networks Routing Engine and Control Board

€22,014.00 Add to cart

JNP10003-RE1 Overview

This Juniper Networks Routing Engine and Control Board spare router plug-in module is designed for use with the Juniper Networks MX10003 Universal Routing Platform. The Juniper Networks MX10003 is an Ethernet-optimized edge router that provides both switching and carrier-class Ethernet routing. Each router provides full duplex, high-density Ethernet interfaces and high-capacity switching throughput. The MX10003 host subsystem consists of two Routing and Control Boards, or RCBs. The RCB is an integrated board and a single FRU that provides Routing Engine (RE) and Control Board (CB) functionality.
ACX5096-AC-L2-L3 Juniper Networks ACX Series 5096 Router
Add to wishlist Compare

ACX5096-AC-L2-L3 Juniper Networks ACX Series 5096 Router

€49,799.00 Add to cart

ACX5096-AC-L2-L3 Overview

Juniper Networks ACX Series Universal Access Routers are Juniper's response to a shift in metro network architecture where the access and aggregation layer is extending the operational intelligence from the service provider edge to the access network. The ACX Series simplifies access and aggregation architectures by eliminating unnecessary layers and network overlays, dramatically reducing CapEx and OpEx. Based on architectural simplification and cost reduction, service providers and enterprises can adopt the true universal access paradigm enabled by the ACX Series.
ASR1001-X-DNA Cisco ASR 1001-X Router Rack Mountable
Add to wishlist Compare

ASR1001-X-DNA Cisco ASR 1001-X Router Rack Mountable

€24,999.00 Add to cart

ASR1001-X-DNA Overview

The Cisco ASR 1000 series delivers multiple services embedded in the Cisco QuantumFlow Processor (QFP) at wire speeds from 2.5 to 200 Gbps. The services supported on the Cisco QFP include security services (for example, up to 78G encryption throughput and up to 6M firewall sessions), quality of service (QoS), Application Visibility and Control, Performance Routing, broadband aggregation, Cisco Unified Border Element (SP Edition), and Cisco Unified Border Element (Enterprise Edition). Additionally, Cisco ASR 1000 offers feature rich scalable Data Center Interconnect (DCI) solutions that include Overlay Transport Virtualization (OTV) and Virtual Private Label Switching (VPL) to connect geographically dispersed data centers. Advanced routing techniques like Locator Identity Separation Protocol (LISP) allow host mobility within and across subnets
ASR1001X-5G-SEC Cisco ASR 1001-X Security Bundle Router
Add to wishlist Compare

ASR1001X-5G-SEC Cisco ASR 1001-X Security Bundle Router

€57,299.00 Add to cart

ASR1001X-5G-SEC Overview

Cisco ASR 1001-X Security Bundle Router Rack Mountable with Cisco A
MX960BASE-DC Juniper Networks MX-series MX960 modular Router
Add to wishlist Compare

MX960BASE-DC Juniper Networks MX-series MX960 modular Router

€62,657.00 Add to cart

MX960BASE-DC Overview

The MX960 Ethernet Services Router establishes a new industry standard for Carrier Ethernet capacity, density and performance. The first in a series of Juniper platforms optimized for emerging Ethernet network architectures and services, the MX960 is purpose built for the most demanding carrier applications. The MX960 leverages the JUNOS operating system to enable carriers to seamlessly and cost-effectively deploy Ethernet and accelerate their next-generation network deployments. By combining a best-in-class hardware platform with the reliability and service flexibility of JUNOS, the MX960 delivers a combination of features and capabilities previously unattainable in Carrier Ethernet deployments.
MX480BASE-DC Juniper Networks MX-series MX480 Desktop Router
Add to wishlist Compare

MX480BASE-DC Juniper Networks MX-series MX480 Desktop Router

€66,999.00 Add to cart

MX480BASE-DC Overview

The MX480 Ethernet Services Router provides a dense, highly redundant platform primarily targeted for dense dedicated access aggregation and provider edge services in medium-size and large Points of Presence (POPs).
MX204-P-BASE Juniper Networks MX-series MX204 Router
Add to wishlist Compare

MX204-P-BASE Juniper Networks MX-series MX204 Router

€36,999.00 Add to cart

MX204-P-BASE Overview

The SDN-ready MX204 3D universal edge router is a cloud-grade routing platform that offers the customers ultra-high density and throughput in a space- and power-optimized package. The MX204 addresses the emerging edge and metro Ethernet networking needs of service providers, mobile, web-scale operators, and MSOs by delivering 800 Gbps of throughput in support of high-density 10GbE, 40GbE, and 100GbE interfaces - all in just one rack unit. The MX204 supports a comprehensive suite of routing, switching, security, and service features, including support for automation and telemetry capabilities that serve as the foundation for the future Self-Driving Network. Additionally, the MX204 supports the stringent timing and synchronization requirements of mobile and financial services.
MX80BASE-P Juniper Networks MX-series MX80 Router Rack Mountable
Add to wishlist Compare

MX80BASE-P Juniper Networks MX-series MX80 Router Rack Mountable

€77,499.00 Add to cart

MX80BASE-P Overview

Juniper Networks MX80 3D Universal Edge router is the most compact member of the MX series product family. Only 2 RU high and equipped with front end accessible redundant power supplies and fans, this platform is perfectly suited for environments requiring full Ethernet capabilities, but facing space or power constraints. In addition to four embedded 10 Gigabit Ethernet ports, the MX80 leverages the technology used in the Modular Port Concentrators (MPCs), common across the MX series, and can accommodate multiple combinations of Modular Interface cards (MICs) for increased flexibility.
MX240BASE3-DC Juniper Networks MX-series MX240 Router
Add to wishlist Compare

MX240BASE3-DC Juniper Networks MX-series MX240 Router

€55,499.00 Add to cart

MX240BASE3-DC Overview

The MX240 Ethernet Services Router design delivers increased port density over traditional carrier Ethernet platforms as well as performance of 200+ Gbps throughput, scalability and reliability in a space-efficient package. The MX240 offers fully redundant hardware that includes a redundant Switch Control Board (SCB) and Routing Engines (REs) to increase system availability.
MX204PBASE-AC-1-FS Juniper Networks MX-series MX204 Router
Add to wishlist Compare

MX204PBASE-AC-1-FS Juniper Networks MX-series MX204 Router

€24,000.00 Add to cart

MX204PBASE-AC-1-FS Overview

The SDN-ready MX204 3D universal edge router is a cloud-grade routing platform that offers the customers ultra-high density and throughput in a space- and power-optimized package. The MX204 addresses the emerging edge and metro Ethernet networking needs of service providers, mobile, web-scale operators, and MSOs by delivering 800 Gbps of throughput in support of high-density 10GbE, 40GbE, and 100GbE interfaces - all in just one rack unit.
NFX350-S2-AC Juniper Networks NFX Series Network Services Platform
Add to wishlist Compare

NFX350-S2-AC Juniper Networks NFX Series Network Services Platform

€43,999.00 Add to cart

NFX350-S2-AC Overview

Powerful universal CPE platform for large branch deployments, with flexible network interfaces, third-party VNF support, and automation to enable secure, scalable SD-WAN.
PTX10001-36MR-AC Juniper PTX Series PTX10001-36MR Router
Add to wishlist Compare

PTX10001-36MR-AC Juniper PTX Series PTX10001-36MR Router

€113,999.00 Add to cart

PTX10001-36MR-AC Overview

The Juniper PTX Series PTX10001-36MR Router is ideal for addresses the massive bandwidth demands through scale-out architectures. It delivers integrated, multilayer security, including native 400G inline MACsec, optimal telemetry at scale and unprecedented power at 0.14 watts per gigabit. It brings engineering simplicity and network design together for a natural upgrade path from 100GE to 400GE.
NFX150-C-S1E-AE Juniper Networks NFX Series Network Services
Add to wishlist Compare

NFX150-C-S1E-AE Juniper Networks NFX Series Network Services

€4,699.00 Add to cart

NFX150-C-S1E-AE Overview

The Juniper NFX150 Network Services Platform is a secure, automated, software-driven customer premises equipment (CPE) platform that delivers virtualized network and security services on demand. Leveraging Network Functions Virtualization (NFV) and built on the Juniper Cloud CPE solution, NFX150 enables service providers to deploy and chain multiple, secure, high-performance virtualized network functions (VNFs) on a single device. It is suited for small to medium-sized enterprises.
ACX5448-AC-AFI Juniper Networks ACX Series Universal Metro Router
Add to wishlist Compare

ACX5448-AC-AFI Juniper Networks ACX Series Universal Metro Router

€53,799.00 Add to cart

ACX5448-AC-AFI Overview

The Juniper Networks ACX5000 line of Universal Metro Routers is a response to a shift in metro network architectures where the access and aggregation layers are extending operational intelligence from the service provider edge to the access network. The ACX5000 line simplifies access and aggregation architectures by eliminating unnecessary layers and network overlays, dramatically reducing CapEx and OpEx. Based on architectural simplification and cost reduction, the ACX5000 line gives service providers and enterprises the ability to adopt a true universal metro paradigm.
VWIC2-1MFT-T1/E1 Router Multiflex Voice/WAN interface Card
Add to wishlist Compare

VWIC2-1MFT-T1/E1 Router Multiflex Voice/WAN interface Card

€445.00 Add to cart

VWIC2-1MFT-T1/E1 Overview

The Cisco Second-generation 1- and 2-port T1/E1 Multiflex Trunk Voice/WAN Interface (MFT VWIC2s) support data and voice applications on the Cisco 1721 (data only), 1751 and 1760 Modular Access Routers, the Cisco 2600XM Multiservice Router, the Cisco 2691 Multiservice Platform, the Cisco 3662 Telco Versatile DCN Access Platform, the Cisco 3725 and 3745 Multiservice Routers, and the Cisco 1841 (data only), 2801, 2811, 2821, 2851, 3825, and 3845 Integrated Services Routers. The Cisco MFT VWIC2 combines WAN-interface-card (WIC) and voice-interface-card (VIC) functions to provide unparalleled flexibility, versatility, and investment protection through its many uses.

Filter Products

Archives

Categories

Product Categories

Filter by price

Product Status

Shopping Cart
No products in the cart.