OCX1100-48SX-AFI Juniper Networks OCX1100 Switch

25,088.00

OCX1100-48SX-AFI Overview

The Juniper Networks OCX1100 open networking switch is designed for large Cloud Builders looking to capitalize on innovations derived from real-world, massive scale, data center customer environments and backed by the industry recognized Open Compute Project (OCP) Foundation.

OCX1100-48SX-AFI Technical Specifications

Juniper Networks OCX1100 Open Networking Switch 48 ports managed

Manufacturer :Netscreen
Brand :Juniper, Juniper Networks
Product Line :Juniper Networks
Model :OCX1100 Open Networking Switch
Packaged Quantity :1
Chassis
Airflow Direction :Back to front airflow
Performance
Performance :Switching capacity: 1.08 Bpps, Throughput: 1.44 Tbps
Capacity
Capacity :IPv4 routes (Multicast): 104000, IPv6 routes (Unicast): 56000, IPv6 hosts: 56000, IPv6 routes (Multicast): 52000, IPv4 routes (Unicast): 112000, IPv4 hosts: 112000
Networking
Type :Switch
Subcategory :Network hubs and switches
Subtype :10 Gigabit Ethernet
Form Factor :Rack-mountable
Ports Qty :72
Advanced Switching :Layer 3
Routing Protocol :Policy-based routing (PBR), OSPFv3, IGMPv2, BGP-4, Bidirectional Forwarding Detection (BFD), OSPF for IPv6, BGP for IPv6, IGMPv3, IGMP, IS-ISv6, RIP-2, IS-IS, OSPFv2, MLDv2, Static IPv4 routing, Static IPv6 routing, BGP, OSPF, MLD, ECMP, RIP, CIDR, PIM-SM, MSDP
MAC Address Table Size :288K entries
Jumbo Frame Support :9216 bytes
Manageable :Yes
Remote Management Protocol :Telnet, SNMP 3, SSH, SNMP 1, SNMP 2, CLI, TFTP, RMON
Features :Quality of Service (QoS), BOOTP support, ICMP Router Discovery Protocol (IRDP), Dynamic ARP Inspection (DAI), SNMP support, DHCP server, RARP support, DHCP snooping, Neighbor Discovery Protocol (NDP), Management Information Base (MIB), DHCP relay, ARP support, Storm Control, IGMP snooping, Smoothed Deficit Weighted Round Robin (SDWRR), sFlow v5, IP source guard, Back to front airflow, Denial of Service (DoS), Weighted Random Early Detection (WRED), 12 MB shared buffer, Low-latency queuing (LLQ)
Compliant Standards :IEEE 802.1p
Ports
Qty :48
Type :10 Gigabit SFP+
Ports (2nd)
Qty :6
Type :40 Gigabit QSFP+ (breakout compatible)
Interface Provided
Interfaces :1 x 1000Base-T RJ-45 management, 6 x 40Gbit LAN QSFP+ (breakout compatible), 48 x 10Gbit LAN SFP+, 1 x console RJ-45, 1 x micro-USB 2.0 Type A
Power Device
Type :Internal power supply
Hot-Plug :Hot-plug
Power Redundancy :Yes
Power Redundancy Scheme :1+1
Installed Qty :2
Max Supported Qty :2
Nominal Voltage :AC 120/230 V
Frequency Required :50/60 hertz
Power Consumption Operational :185 watt
Miscellaneous
Color Category :White
Height (Rack Units) :1
Encryption Algorithm :MD5
Authentication Method :Secure Shell v.2 (SSH2), Secure Shell (SSH), TACACS+, RADIUS
Compliant Standards :CB, BSMI CNS 14336-1, CAN/CSA C22.2 No. 60950-1, EN 60950-1, ICES-003 Class A, Directive 2006/95/EC, CCC, BSMI CNS 13438 Class A, EN 55024 Class A, FCC, UL, FCC CFR47 Part 15 B Class A, IC Class A, EN 55022 Class A, IEC 60950-1:2005, GB 4943.1, BSMI, cUL, Directive 2004/108/EC, GB 9254, UL 60950-1, CAN/CSA-C22.2 No. 60950-1
Dimensions & Weight
Width :17.3 inch
Depth :19.2 inch
Height :1.7 inch
Weight :20 lbs
Environmental Parameters
Min Operating Temperature :32 degree Fahrenheit
Max Operating Temperature :104 degree Fahrenheit
Min Storage Temperature :-40 degree Fahrenheit
Max Storage Temperature :158 degree Fahrenheit
Humidity Range Operating :0 – 95% (non-condensing)
Humidity Range Storage :0 – 95% (non-condensing)

Reviews

There are no reviews yet.

Be the first to review “OCX1100-48SX-AFI Juniper Networks OCX1100 Switch”

Your email address will not be published. Required fields are marked *

OCX1100-48SX-AFI Juniper Networks OCX1100 Switch
25,088.00