EX4200-48PX Juniper Networks EX 4200 48PX switch managed

EX4200-48PX Technical Specifications

Juniper Networks EX 4200 48PX switch 48 ports managed

Manufacturer :Netscreen
Brand :Juniper, Juniper Networks
Product Line :Juniper Networks EX 4200
Model :48PX
Packaged Quantity :1
Chassis
Built-in Devices :Status LCD
Processor
Type :PowerPC
Clock Speed :1 GHZ
RAM
Installed Size :1 GB
Flash Memory
Installed Size :1 GB, 1 GB
Performance
Performance :Throughput: 101 Mpps
Networking
Type :Switch
Subcategory :Network hubs and switches
Subtype :Gigabit Ethernet
Form Factor :Desktop
Stackable :Stackable
Max Units In A Stack :10
Ports Qty :48
Advanced Switching :Layer 3
Routing Protocol :IGMPv3, PIM-SM, OSPF, IS-IS, Policy-based routing (PBR), Static IP routing, RIP-1, IGMPv2, IGMP, BGP, VRRP, RIP-2
MAC Address Table Size :24K entries
Manageable :Yes
Remote Management Protocol :SNMP 1, RMON 2, RMON 9, HTTP, RMON 1, RMON 3, SSH-2, RMON, SNMP 2, HTTPS, SNMP 3
Power Over Ethernet (PoE) :PoE
Status Indicators :LCD display
Features :Virtual Chassis technology, Syslog support, PoE+, 256-bit encryption, Dynamic ARP Inspection (DAI), Non-Stop Bridging (NSB), DHCP proxy, Jumbo Frames support, DHCP snooping, Layer 2 switching, Store and forward, Quality of Service (QoS), IPv6 support, DoS attack prevention, VLAN support, DHCP support, Temperature sensor, Redundant trunk group (RTG), High Availability, MPLS support, ARP support, Non-Stop Routing (NSR), Layer 3 switching, DHCP server, RADIUS support, Time Domain Reflectometry (TDR), Hot swap module replacement, Graceful Route Engine Switchover (GRES), Auto-uplink (auto MDI/MDI-X), IGMP snooping, Routing
Compliant Standards :IEEE 802.1s, IEEE 802.1w, IEEE 802.3af, IEEE 802.1Q, IEEE 802.1x, IEEE 802.1ab (LLDP), IEEE 802.3ad (LACP), IEEE 802.1p, IEEE 802.1D
Ports
Qty :48
Type :10/100/1000 (PoE)
Expansion Slots
Expansion Slots :1 (total) / 1 (free) x expansion slot
Interface Provided
Interfaces :1 x network stack device, 48 x 10Base-T/100Base-TX/1000Base-T – RJ-45 PoE, 1 x management
Software
Type :Juniper NetScreen-Security Manager
Power Device
Type :Internal power supply
Hot-Plug :Hot-plug
Power Redundancy :Yes
Installed Qty :1
Max Supported Qty :2
Nominal Voltage :AC 120/230 V
Power Consumption Operational :930 watt
Miscellaneous
Height (Rack Units) :1
Encryption Algorithm :PEAP, TTLS, MD5, TLS
Authentication Method :Secure Shell v.2 (SSH2), RADIUS, TACACS+, Extensible Authentication Protocol (EAP)
Compliant Standards :EN55024, cUL, IEC 60950-1, CSA 22.2 No. 60950, EN 60950-1, ICES-003 Class A, UL 60950-1, TUV GS, EN300-386, EN55022 Class A, CISPR 22 Class A, VCCI Class A ITE, RoHS 5/6, FCC CFR47 Part 15, EN 300 386
Dimensions & Weight
Width :17.4 inch
Depth :16.4 inch
Height :1.7 inch
Weight :18.3 lbs
Environmental Parameters
Min Operating Temperature :32 degree Fahrenheit
Max Operating Temperature :113 degree Fahrenheit
Humidity Range Operating :10 – 85%