EX4200-24T-TAA Juniper Networks EX 4200 24T switch

4,285.00

EX4200-24T-TAA Overview

The Juniper Networks EX 4200 series Ethernet switches with Virtual Chassis technology combine the High Availability (HA) and carrier-class reliability of modular systems with the economics and flexibility of stackable platforms, delivering a high-performance, scalable solution for data center, campus and branch office environments.

EX4200-24T-TAA Technical Specifications

Juniper Networks EX 4200 24T switch 24 ports managed

Manufacturer :Netscreen
Brand :Juniper, Juniper Networks
Product Line :Juniper Networks EX 4200
Model :24T
Packaged Quantity :1
Chassis
Built-in Devices :Status LCD
Processor
Type :PowerPC
Clock Speed :1 GHZ
RAM
Installed Size :1 GB
Flash Memory
Installed Size :1 GB, 1 GB
Networking
Type :Switch
Subcategory :Network hubs and switches
Subtype :Gigabit Ethernet
Form Factor :Desktop
Stackable :Stackable
Max Units In A Stack :10
Ports Qty :24
Advanced Switching :Layer 3
Routing Protocol :IS-IS, OSPF, Policy-based routing (PBR), RIP-1, Static IP routing, IGMP, BGP, IGMPv3, VRRP, RIP-2, IGMPv2, PIM-SM
MAC Address Table Size :24K entries
Manageable :Yes
Remote Management Protocol :SNMP 3, HTTP, SNMP 2, SNMP 1, RMON 9, HTTPS, RMON 1, RMON, RMON 2, SSH-2, RMON 3
Power Over Ethernet (PoE) :PoE
Status Indicators :LCD display
Features :Non-Stop Routing (NSR), Syslog support, Virtual Chassis technology, High Availability, Power over Ethernet (PoE), DHCP server, VLAN support, 256-bit encryption, Auto-uplink (auto MDI/MDI-X), Temperature sensor, Quality of Service (QoS), Layer 2 switching, Graceful Route Engine Switchover (GRES), DHCP support, RADIUS support, Redundant trunk group (RTG), MPLS support, Time Domain Reflectometry (TDR), Non-Stop Bridging (NSB), DoS attack prevention, Jumbo Frames support, Hot swap module replacement, Dynamic ARP Inspection (DAI), ARP support, Layer 3 switching, Routing, DHCP proxy, IPv6 support, Store and forward, DHCP snooping, IGMP snooping
Compliant Standards :IEEE 802.3af, IEEE 802.1x, IEEE 802.3ad (LACP), IEEE 802.1D, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.1w, IEEE 802.1Q, IEEE 802.1p
Ports
Qty :24
Type :10/100/1000
Expansion Slots
Expansion Slots :1 (total) / 1 (free) x expansion slot
Interface Provided
Interfaces :8 x 10Base-T/100Base-TX/1000Base-T – RJ-45 PoE, 1 x network stack device, 1 x management, 16 x 10Base-T/100Base-TX/1000Base-T – RJ-45
Software
Type :Juniper NetScreen-Security Manager
Power Device
Type :Internal power supply
Hot-Plug :Hot-plug
Power Redundancy :Yes
Installed Qty :1
Max Supported Qty :2
Nominal Voltage :AC 120/230 V
Power Consumption Operational :320 watt
Miscellaneous
TAA Compliant :Yes
Height (Rack Units) :1
Encryption Algorithm :TLS, TTLS, PEAP, MD5
Authentication Method :Secure Shell v.2 (SSH2), RADIUS, TACACS+, Extensible Authentication Protocol (EAP)
Compliant Standards :EN55022 Class A, EN300-386, CSA 22.2 No. 60950, IEC 60950-1, FCC CFR47 Part 15, VCCI Class A ITE, EN55024, cUL, RoHS 5/6, TUV GS, ICES-003 Class A, CISPR 22 Class A, EN 60950-1, UL 60950-1, EN 300 386
Dimensions & Weight
Width :17.4 inch
Depth :16.4 inch
Height :1.7 inch
Weight :16.53 lbs
Environmental Parameters
Min Operating Temperature :32 degree Fahrenheit
Max Operating Temperature :113 degree Fahrenheit
Humidity Range Operating :10 – 85%

Reviews

There are no reviews yet.

Be the first to review “EX4200-24T-TAA Juniper Networks EX 4200 24T switch”

Your email address will not be published. Required fields are marked *

EX4200-24T-TAA Juniper Networks EX 4200 24T switch
4,285.00