EX4200-24PX Juniper EX4200 24PX switch 24 ports managed

EX4200-24PX Technical Specifications

Juniper Networks EX 4200 24PX switch 24 ports managed

Manufacturer :Netscreen
Brand :Juniper, Juniper Networks
Product Line :Juniper Networks EX 4200
Model :24PX
Packaged Quantity :1
Chassis
Built-in Devices :Status LCD
Processor
Type :PowerPC
Clock Speed :1 GHZ
RAM
Installed Size :1 GB
Flash Memory
Installed Size :1 GB, 1 GB
Performance
Performance :Throughput:
Networking
Type :Switch
Subcategory :Network hubs and switches
Subtype :Gigabit Ethernet
Form Factor :Desktop
Stackable :Stackable
Max Units In A Stack :10
Ports Qty :24
Advanced Switching :Layer 3
Routing Protocol :RIP-2, IGMPv3, RIP-1, Policy-based routing (PBR), IGMPv2, BGP, IGMP, IS-IS, OSPF, PIM-SM, VRRP, Static IP routing
MAC Address Table Size :32K entries
Jumbo Frame Support :9216 bytes
Manageable :Yes
Remote Management Protocol :RMON 3, SNMP 1, HTTP, SSH-2, RMON, RMON 2, HTTPS, SNMP 2, RMON 1, RMON 9, SNMP 3
Power Over Ethernet (PoE) :PoE
Status Indicators :LCD display
Features :Virtual Chassis technology, Layer 2 switching, Jumbo Frames support, IGMP snooping, PoE+, DHCP proxy, ARP support, sFlow, Non-Stop Bridging (NSB), Graceful Route Engine Switchover (GRES), Dynamic ARP Inspection (DAI), Non-Stop Routing (NSR), Store and forward, Redundant trunk group (RTG), DoS attack prevention, Quality of Service (QoS), RADIUS support, High Availability, DHCP snooping, Temperature sensor, VLAN support, MPLS support, Routing, DHCP support, Power over Ethernet (PoE), Auto-uplink (auto MDI/MDI-X), Syslog support, IPv6 support, Hot swap module replacement, DHCP server, Layer 3 switching, Time Domain Reflectometry (TDR)
Compliant Standards :IEEE 802.1Q, IEEE 802.1D, IEEE 802.1ab (LLDP), IEEE 802.3ad (LACP), IEEE 802.1s, IEEE 802.1x, IEEE 802.3af, IEEE 802.1w, IEEE 802.1p
Ports
Qty :24
Type :10/100/1000 (PoE)
Expansion Slots
Expansion Slots :1 (total) / 1 (free) x expansion slot
Interface Provided
Interfaces :24 x 10Base-T/100Base-TX/1000Base-T – RJ-45 PoE, 1 x console management, 1 x network stack device
Cable Details
Cables Included :1 x stacking cable – 1.6 ft
Software
Type :Juniper NetScreen-Security Manager
Power Device
Type :Internal power supply
Hot-Plug :Hot-plug
Power Redundancy :Optional
Power Redundancy Scheme :1+1 (with optional power supply)
Installed Qty :1
Max Supported Qty :2
Nominal Voltage :AC 120/230 V
Power Consumption Operational :930 watt
Miscellaneous
Height (Rack Units) :1
Encryption Algorithm :MD5, TLS, TTLS, PEAP
Authentication Method :TACACS+, Extensible Authentication Protocol (EAP), RADIUS, Secure Shell v.2 (SSH2)
Compliant Standards :TUV GS, RoHS 5/6, CSA 22.2 No. 60950, EN55022 Class A, EN55024, UL 60950-1, EN 60950-1, EN300-386, cUL, CISPR 22 Class A, VCCI Class A ITE, IEC 60950-1, ICES-003 Class A, FCC CFR47 Part 15, EN 300 386
Dimensions & Weight
Width :17.4 inch
Depth :16.4 inch
Height :1.7 inch
Weight :18.08 lbs
Environmental Parameters
Min Operating Temperature :32 degree Fahrenheit
Max Operating Temperature :113 degree Fahrenheit
Humidity Range Operating :10 – 85%