EX3400-24P – Juniper Networks EX Series EX3400-24P switch

2,399.00

Juniper EX3400-24P

EX3400 Ethernet Switches are a cost-effective solution for highly demanding converged data, voice, and video enterprise access networks. The compact, fixed-configuration 1U devices offer levels of performance and management. This model offers 24 10/100/1000BASE-T ports, the EX3400 switch also supports IEEE 802.3af Power over Ethernet for powering networked telephones, video cameras, wireless LAN access points, and other IP devices. Four front-panel dual-mode (GbE/10GbE) SFP/SFP+ uplink ports and two 40GbE QSFP+ ports are also available for connecting the switches to upstream devices. The EX3400 supports Juniper’s unique Virtual Chassis technology for interconnecting up to 10 switches that can be managed as a single device. The EX3400 can also be configured as a satellite device in a Junos Fusion Enterprise deployment, which aggregates large numbers of access switches into a logical management platform.

EX3400-24P Technical Specifications

Juniper Networks EX Series switch 24 ports managed rack mountable

Manufacturer :Netscreen
Brand :Juniper, Juniper Networks
Product Line :Juniper Networks EX Series
Packaged Quantity :1
Chassis
Airflow Direction :Front to back airflow
Processor
Installed Qty :1
Clock Speed :1 GHZ
RAM
Installed Size :2 GB
Flash Memory
Installed Size :2 GB, 2 GB
Performance
Performance :Throughput: 214 Mpps, Switching capacity (64-byte packet size): 288 Gbps
Capacity
Capacity :IPv4 hosts: 36000, Multiple Spanning Tree Protocol instances: 64, VLAN Spanning Tree Protocol instances: 510, ARP entries: 8000, IPv6 routes (Multicast): 2000, Virtual interfaces (VLANs): 4093, ACL entries: 1500, LAG groups: 128, Maximum of neighboring networks: 8000, IPv4 routes (Multicast): 4000, QoS hardware queues per port: 12, IGMP snooping entries: 1000, Maximum member ports per LAG: 16, IPv6 hosts: 18000
Networking
Type :Switch
Subcategory :Network hubs and switches
Subtype :Gigabit Ethernet
Form Factor :Rack-mountable
Stackable :Stackable
Max Units In A Stack :10
Ports Qty :24
Advanced Switching :Layer 3
Routing Protocol :IS-IS, Static IPv4 routing, RIPng, RIP-1, Static IPv6 routing, CIDR, RIP-2, MSDP
MAC Address Table Size :32000 entries
Jumbo Frame Support :9216 bytes
Manageable :Yes
Remote Management Protocol :RMON 3, SNMP 1, TFTP, RMON 1, HTTPS, SNMP 3, SNMP 2c, Telnet, RMON 2, HTTP, SSH, RMON 9, CLI
Power Over Ethernet (PoE) :PoE+
PoE Budget :370 watt
Features :Neighbor Discovery Protocol (NDP), Front to back airflow, ARP support, Management Information Base (MIB) II, Energy Efficient Ethernet, DoS attack prevention, Captive Portal, Rapid Spanning Tree Protocol (RSTP) support, BOOTP support, Class of Service (CoS), IP Precedence, SNTP support, Virtual Route Forwarding-Lite (VRF-Lite), ICMP Router Discovery Protocol (IRDP), DHCP snooping, Non-Stop Routing (NSR), Cable Diagnostics Function, DiffServ Code Point (DSCP) support, Port mirroring, Management Information Base (MIB), Non-Stop Bridging (NSB), Smoothed Deficit Weighted Round Robin (SDWRR), Temperature sensor, Tagged VLAN, System log, Strict Priority (SP), DHCP relay, DHCP proxy, NTP time synchronization, Internet Control Message Protocol (ICMP), Access Control List (ACL) support, Redundant trunk group (RTG), DiffServ support, RARP support, Per-VLAN Spanning Tree Plus (PVST+), Spanning Tree Protocol (STP) support, Graceful Route Engine Switchover (GRES), Zero Touch Auto Provisioning, Multiple Spanning Tree Protocol (MSTP) support, Virtual Chassis technology, IPv6 support, Store and forward, MACsec support, VLAN Spanning Tree Protocol (VSTP), DHCP server, DHCP client, sFlow, VLAN support, Multiple VLAN Registration Protocol (MVRP), Auto-uplink (auto MDI/MDI-X), Quality of Service (QoS), Dynamic ARP Inspection (DAI)
Compliant Standards :IEEE 802.3at, IEEE 802.1Q, IEEE 802.3u, IEEE 802.1ab (LLDP), IEEE 802.1p, IEEE 802.3ae, ANSI/TIA-1057, IEEE 802.3ad (LACP), IEEE 802.3af, IEEE 802.1x, IEEE 802.1BR, IEEE 802.3ab, IEEE 802.1ag, IEEE 802.1s, IEEE 802.3, IEEE 802.1w, IEEE 802.1ad, IEEE 802.3z, IEEE 802.1ae, IEEE 802.1D, IEEE 802.1ak
Ports
Qty :24
Type :10/100/1000 (PoE+)
Ports (2nd)
Qty :4
Type :Gigabit SFP / 10 Gigabit SFP+
Ports (3rd)
Qty :2
Type :40 Gigabit QSFP+
Interface Provided
Interfaces :1 x 100Base-TX RJ-45 management, 24 x 1000Base-T RJ-45 PoE+ – 30 W, 1 x serial management, 4 x 10Gbit LAN SFP+ uplink/stacking, 2 x 40Gbit LAN QSFP+ uplink/stacking
Power Device
Type :Internal power supply
Hot-Plug :Hot-plug
Power Redundancy :Optional
Power Redundancy Scheme :1+1 (with optional power supply)
Installed Qty :1
Max Supported Qty :2
Power Provided :600 watt
Nominal Voltage :AC 120/230 V
Power Consumption Operational :110 watt
Miscellaneous
Color Category :Gray
Height (Rack Units) :1
Encryption Algorithm :TTLS, MD5, TLS, PEAP
Authentication Method :TACACS+, Secure Shell v.2 (SSH2), RADIUS, Extensible Authentication Protocol (EAP)
Compliant Standards :CAN/CSA C22.2 No. 60950-1 Second Edition, ICES-003 Class A, TUV GS, EN 60825-1, CISPR 22 Class A, cUL, UL 60950-1 Second Edition, RoHS 6/6, EN55024, EN 55022 Class A, EN 300386, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, VCCI Class A, FCC CFR47 Part 15 A, CB
Dimensions & Weight
Width :17.2 inch
Depth :13.8 inch
Height :1.7 inch
Weight :13.89 lbs
Environmental Parameters
Min Operating Temperature :32 degree Fahrenheit
Max Operating Temperature :113 degree Fahrenheit
Min Storage Temperature :-40 degree Fahrenheit
Max Storage Temperature :158 degree Fahrenheit
Humidity Range Operating :10 – 85% (non-condensing)
Humidity Range Storage :0 – 95% (non-condensing)

Reviews

There are no reviews yet.

Be the first to review “EX3400-24P – Juniper Networks EX Series EX3400-24P switch”

Your email address will not be published. Required fields are marked *

EX3400-24P – Juniper Networks EX Series EX3400-24P switch
2,399.00