C9300-24P-1A Cisco Catalyst 9300 Network Switch 24 Port

4,599.00

C9300-24P-1A Overview

The Catalyst 9300 series is an advanced stackable switching platform. These network switches are built for security, IoT, and the cloud.

C9300-24P-1A Technical Specifications

Cisco Catalyst 9300 Network Advantage Switch 24 Port Managed

Capacity
Type : Flexible NetFlow entries
Value : 64000
Type : IPv4 routing table entries
Value : 32000
Type : IPv6 routing table entries
Value : 16000
Type : Packet buffer size
Value : 16 MB
Type : Switched virtual interfaces (SVIs)
Value : 2000
Type : VLAN IDs
Value : 4000
Dimensions & Weight
Depth : 17.7 in
Height : 1.7 in
Weight : 16.31 lbs
Width : 17.5 in
Environmental Parameters
Humidity Range Operating : 5 – 90% (non-condensing)
Humidity Range Storage : 5 – 90% (non-condensing)
Max Operating Temperature : 113 °F
Max Storage Temperature : 158 °F
Min Operating Temperature : 23 °F
Min Storage Temperature : -40 °F
Flash Memory
Installed Size : 16 GB
Header
Brand : Cisco
Edition : Network Advantage
Manufacturer : CISCO DS HARDWARE DIRECT
Model : 9300
Packaged Quantity : 1
Product Line : Cisco Catalyst
Interface Provided
Comments : PoE+
Connector Type : RJ-45
Qty : 24
Type : 1000Base-T
Qty : 1
Type : USB 2.0
Miscellaneous
Color Category : Gray
Compliant Standards : AS/NZS 3548 Class A, BSMI Class A, CAN/CSA C22.2 No. 60950-1, CCC, CISPR 22 Class A, CISPR 24, EN 300386, EN 55022 Class A, EN 60950-1, EN 61000-3-2, EN 61000-3-3, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-6-1, EN50082-1, EN55024, FCC CFR47 Part 15 A, ICES-003 Class A, IEC 60950-1, RoHS 5/6, TVCN 7317, UL 60950-1, VCCI Class A, VCCI V-3/2009 Class A
Encryption Algorithm : 128-bit AES
Height (Rack Units) : 1
MTBF : 299,000 hours
Pricing Type : Federal government
Networking
Advanced Switching : Layer 3
Compliant Standards : IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad (LACP), IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x
Features : 3 fans, 802.1x authentication, Access Control List (ACL) support, Cisco StackPower technology, Cisco StackWise-480 technology, Control plane protection (CoPP), Flexible NetFlow (FNF), FTP client, Full duplex mode, Integrated Wireshark, Management Information Base (MIB), Private VLAN, Quality of Service (QoS), Remote Switch Port Analyzer (RSPAN), Source-Specific Multicast (SSM), Spanning Tree Protocol (STP) support, Trunking, VLAN Double Tagging (Q-in-Q), Weighted Random Early Detection (WRED)
Form Factor : Rack-mountable
Jumbo Frame Support : 9198 bytes
MAC Address Table Size : 32000 entries
Manageable : Yes
PoE Budget : 445 W
Ports Qty : 24
Power Over Ethernet (PoE) : PoE+
Remote Management Protocol : CLI, NETCONF, RESTCONF, RMON 1, RMON 2, SNMP 1, SNMP 2c, SNMP 3
Routing Protocol : IGMP, OSPF, OSPFv3, PIM-SM, PIM-SSM, Policy-based routing (PBR), RIP-1, RIP-2, RIPng, VRRP
Stackable : Stackable
Status Indicators : Status
Subcategory : Network hubs and switches
Subtype : Gigabit Ethernet
Type : Switch
Performance
Type : Forwarding rate
Value : 154.76 Mpps
Type : Stacking bandwidth
Value : 480 Gbps
Type : Switching capacity
Value : 128 Gbps
Ports
Qty : 24
Type : 10/100/1000 (PoE+)
Power Device
Frequency Required : 50 – 60 Hz
Hot-Plug : Hot-plug
Installed Qty : 1
Max Supported Qty : 2
Nominal Voltage : AC 120/230 V
Power Provided : 715 Watt
Power Redundancy : Optional
Type : Internal power supply
RAM
Installed Size : 8 GB

Reviews

There are no reviews yet.

Be the first to review “C9300-24P-1A Cisco Catalyst 9300 Network Switch 24 Port”

Your email address will not be published. Required fields are marked *

C9300-24P-1A Cisco Catalyst 9300 Network Switch 24 Port
4,599.00