C1113-8PMWE Cisco 1100 Series Integrated Services Router

C1113-8PMWE Technical Specifications

Cisco 1100 Series Integrated Services Router

GE: N/A
GE/SFP combo: 1
ADSL2/VDSL2+:
1 G.FAST
(Annex M)
LTE Advanced (CAT6): N/A
802.11ac: 2X2 MIMO
GE: 8
PoE: 4
PoE+: 2
Integrated USB 3.0 AUX/console: Yes
Memory (default and maximum)
DRAM: 4 GB
Flash: 4 GB
Console
· Micro USB console (USB 3.0).
Mini-USB port (reserved)
· Micro-USB port to support remote LTE diagnostics and monitoring tools (Qualcomm CAIT and Spirent UDM) (USB 3.0).
802.11ac
· 2×2 SU-MIMO/MU-MIMO with two spatial streams.
· Maximal Ratio Combining (MRC).
· 20-, 40-, and 80-MHz channels.
· PHY data rates up to 866.7 Mbps (80 MHz on 5 GHz).
· Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Rx).
· 802.11 Dynamic Frequency Selection (DFS).
· Cyclic Shift Diversity (CSD) support.
Software
· Cisco Unified Wireless Network Software with AireOS Wireless Controllers Release 8.5
(8.7 for 1101 series) MR1 or later.
DSL interfaces
· G.FAST (spectrum up to 106MHz) Annex A, Annex B, Annex M and compatible with ADSL2/2+ and VDSL2.
· ITU G.993.2 (VDSL2) and supported profiles: 8a, 8b, 8c, 8d, 12a, 12b, 17a, and 35b.
· ITU G.9700/9701/997.2 G.FAST and supported profiles: 106a, and 106b.
External power supply
· AC input voltage: Universal 100 to 240 VAC.
· Frequency: 50 to 60 Hz.
· Maximum output power: 66W (default).
· Output voltages: 12 VDC.
· Optional PoE and PoE+:
◦ Single 150W power supply required for Cisco 1100-8P series router
◦ Single 115W power supply required for Cisco 1100-4P series router
· External output voltage: 48 VDC.
USB 3.0
· USB devices supported:
◦ USB eTokens and USB flash memory
· Note: Devices USB 3.0 supports to be connected externally.
LEDs
· WWAN (green/amber).
· SIM status (green/amber).
· Received signal strength indication (RSSI) bar (green).
· 3G/LTE service (green/amber).
· GPS (green/amber).
· Speed and link for Gigabit Ethernet WAN port (green).
· Speed and link for all Fast Ethernet LAN ports (green).
Physical dimensions
(H x W x D)
C111X Models
· 1.75 x 12.7 x 9.6 in. (44 x 323 x 244 mm) (includes rubber feet on LTE models).
· 1.75 x 12.7 x 9.03 in. (42 x 323 x 230mm) (includes rubber feet on non-LTE models).
C1101-4PLTEP and C1101-4PLTEPWX Models
· 1.73 x 9.75 x 6.6 in. (43.9 x 247.6 x 167.6 mm) (includes rubber feet models).
Weight
C111X Models
· 1.94 lb to 4.59 lb (1.94kg to 2.08 kg).
· 4.50 lb (2.04 kg) with LTE Advanced.
· 4.76 lb (2.16 kg) with Wave 2 802.11ac Dual Radio.
· 4.89 lb (2.22 kg) with LTE Advanced plus Wave 2 802.11ac Dual Radio.
Environmental operating range
· Nonoperating temperature: -4° to 149°F (-0° to 65°C).
· Nonoperating humidity: 5% to 95% relative humidity (noncondensing).
· Nonoperating altitude: 0 to 15,000 ft (0 to 4570 m).
· Operating temperature: 32° to 104°F (0° to 40°C). C1101 support 32° to 113°F (0° to 45°C).
· Operating humidity: 10% to 85% relative humidity (noncondensing).
· Operating altitude: 0 to 10,000 ft (0 to 3000 m).