ACX5448-AC-AFI Juniper Networks Universal Metro Router

53,850.00

ACX5448-AC-AFI Overview

The Juniper Networks ACX5000 line of Universal Metro Routers is a response to a shift in metro network architectures where the access and aggregation layers are extending operational intelligence from the service provider edge to the access network. The ACX5000 line simplifies access and aggregation architectures by eliminating unnecessary layers and network overlays, dramatically reducing CapEx and OpEx. Based on architectural simplification and cost reduction, the ACX5000 line gives service providers and enterprises the ability to adopt a true universal metro paradigm. The ACX5000 line also provides high capacity, scalability, and a packet optical transport layer, while delivering industry-leading performance with a wide range of port densities and interface types. Table 1 provides an overview of the interfaces supported on each ACX5000 model.

ACX5448-AC-AFI Technical Specifications

Juniper Networks ACX Series Universal Metro Router ACX5448-M Router Rack Mountable

Manufacturer :Netscreen
Brand :Juniper, Juniper Networks
Product Line :Juniper Networks ACX Series Universal Metro Router
Model :ACX5448-M
Packaged Quantity :1
Chassis
Airflow Direction :Front to back airflow
Performance
Performance :Throughput: 800 Gbps
Networking
Type :Router
Form Factor :Rack-mountable
Connectivity Technology :Wired
Data Link Protocol :Gigabit Ethernet, 100 Gigabit Ethernet, 10 Gigabit Ethernet
Routing Protocol :RSVP, IGMP, IS-IS, BGP
Remote Management Protocol :SNMP 3, SNMP 2, YANG, NETCONF, CLI
Features :IGMP snooping, DiffServ Code Point (DSCP) support, Layer 3 VPN (L3VPN) support, Intermediate System to Intermediate System (IS-IS), Integrated Routing and Bridging (IRB), Connectivity Fault Management (CFM), Media Access Control Security (MACsec), Label Distribution Protocol (LDP), Redundant fans, Fast Reroute (FRR), Multiple Spanning Tree Protocol (MSTP) support, Bidirectional Forwarding Detection (BFD), Rapid Spanning Tree Protocol (RSTP) support, VLAN Spanning Tree Protocol (VSTP), Protocol Independent Multicast (PIM), IPv4 support, Layer 2 VPN (L2VPN) support, Hierarchical Quality of Service (HQoS), IPv6 support, Link Aggregation Control Protocol (LACP), Equal-Cost Multipath (ECMP), LLDP support, Bridge protocol data unit (BPDU), Open Shortest Path First (OSPF)
Compliant Standards :IEEE 802.1ad, IEEE 802.3, IEEE 802.3ad (LACP), IEEE 802.1ae, IEEE 802.1ab (LLDP), IEEE 802.1p, IEEE 802.1x, IEEE 802.1Q
Interface Provided
Interfaces :44 x 10Gb Ethernet / 1Gb Ethernet – SFP/SFP+, 6 x 100Gb Ethernet – QSFP28
OS Provided
Type :JUNOS
Power Device
Type :Internal power supply
Nominal Voltage :AC 120/230 V
Frequency Required :50/60 hertz
Miscellaneous
Color Category :Gray
Encryption Algorithm :256-bit AES
Compliant Standards :ETSI EN 300 019-2-3, ETSI EN 300 019-2-1, CISPR 24, EN 55032:2012 Class B, EN 61000-4-11, EN 60950-1, EN 300 386 V1.6.1, UL 60950-1, CISPR 32, VCCI Class A, ICES-003 issue 4 Class B, EN 61000-4-6, AS/NZS CISPR22 Class A, ETSI EN 300 019-2-2, ETSI EN 300 753, BSMI CNS 13438, IEC 60950-1 (CB Certificate and CB Test Report), ITU Y.1731, AS/NZS CISPR 22 Class B, EN 55032:2012 Class A, ICES-003 issue 4, CAN/CSA-C22.2 No. 60950-1, EN 60825-1, EN55024, KN22 Class A, FCC Part 15 A
Dimensions & Weight
Width :17.3 inch
Depth :25.5 inch
Height :1.7 inch
Weight :26.12 lbs
Environmental Parameters
Min Operating Temperature :32 degree Fahrenheit
Max Operating Temperature :131 degree Fahrenheit
Humidity Range Operating :5 – 90% (non-condensing)

Reviews

There are no reviews yet.

Be the first to review “ACX5448-AC-AFI Juniper Networks Universal Metro Router”

Your email address will not be published. Required fields are marked *

ACX5448-AC-AFI Juniper Networks Universal Metro Router
53,850.00