Italian 
C9300L-48P-4X-E Cisco Catalyst 9300L Network Switch 48 Port
€5,599.00
C9300L-48P-4X-E Overview
The Cisco Catalyst 9300 Series switches are Cisco’s lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry’s most widely deployed switching platform. Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco’s lead enterprise architecture. At up to 480 Gbps, they are the industry’s highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density Wi-Fi 6 and 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch.
C9300L-48P-4X-E Technical Specifications
Cisco Catalyst 9300L Network Essentials switch 48 port
Capacity
Type :ACL scale entries
Type :IPv4 routes
Value :32000
Type :IPv6 routes
Value :16000
Type :Multicast scale
Value :8000
Type :QoS scale entries
Value :5120
Type :Routed ports
Value :416
Type :Switched virtual interfaces (SVIs)
Value :1000
Type :VLANs supported
Value :4094
Dimensions & Weight
Depth :1.7 in
Height :16.1 in
Weight :15.5 lbs
Width :17.5 in
Environmental Parameters
Humidity Range Operating :5 – 90% (non-condensing)
Humidity Range Storage :5 – 90% (non-condensing)
Max Storage Temperature :158 °F
Min Storage Temperature :-40 °F
Flash Memory
Installed Size :16 GB
Header
Brand :Cisco
Edition :Network Essentials
Manufacturer :CISCO DS HARDWARE DIRECT
Model :9300L
Packaged Quantity :1
Product Line :Cisco Catalyst
Interface Provided
Comments :Uplink
Connector Type :SFP+
Qty :4 SFP+
Type :10GBase-X
Connector Type :RJ-45
Qty :48
Type :1000Base-T
Miscellaneous
Color Category :Gray
Compliant Standards :AS/NZS 3548 Class A, AS/NZS 60950-1, BSMI Class A, CAN/CSA-C22.2 No. 60950-1, CCC, CISPR 22 Class A, CISPR 24, CISPR 32 Class A, CISPR 35, CNS 13438, EN 300386, EN 55022 Class A, EN 55032 Class A, EN 60950-1, EN 61000-3-2, EN 61000-3-3, EN 61000-6-1, EN55024, FCC CFR47 Part 15 B Class A, ICES-003 Class A, IEC 60950-1, KN32, KN35, RoHS 5/6, TCVN 7189 Class A, TCVN 7317, UL 60950-1, V-3 Class A, VCCI Class A
MTBF :309,020 hours
Networking
Advanced Switching :Layer 3
Compliant Standards :IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad (LACP), IEEE 802.3bz, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Features :16MB packet buffer, 802.1x authentication, Cisco StackWise Technology, Class of Service (CoS), Committed Information Rate (CIR), Control plane protection (CoPP), DiffServ Code Point (DSCP) support, Embedded Event Manager (EEM), Energy Efficient Ethernet, First Hop Security (FHS), Flexible NetFlow (FNF), MACsec support, Management Information Base (MIB), NetFlow, Protocol Independent Multicast (PIM), PVLAN support, PXE support, Quality of Service (QoS), Rapid Per-VLAN Spanning Tree Plus (PVRST+), Remote Switch Port Analyzer (RSPAN), Shaped Round Robin (SRR), Switched Port Analyzer (SPAN)
Form Factor :Rack-mountable
Jumbo Frame Support :9198 bytes
MAC Address Table Size :32000 entries
PoE Budget :505 W
Ports Qty :48
Power Over Ethernet (PoE) :PoE+
Remote Management Protocol :CLI, NETCONF, RESTCONF, RMON 1, RMON 2, SNMP 1, SNMP 2c, SNMP 3
Routing Protocol :EIGRP, EIGRP for IPv6, MSTP, OSPF, PIM-SM, PIM-SSM, Policy-based routing (PBR), RIP-1, RIP-2, RIPng, VRRP
Stackable :Stackable
Subcategory :Network hubs and switches
Subtype :Gigabit Ethernet
Type :Switch
Performance
Type :Forwarding rate
Value :130.95 Mpps
Type :Forwarding rate with stacking
Value :369.05 Mpps
Type :Switching capacity
Value :176 Gbps
Type :Switching capacity with stacking
Value :496 Gbps
Ports
Qty :48
Type :10/100/1000 (PoE+)
Ports (2nd)
Qty :4
Type :10 Gigabit SFP+ (uplink)
Power Device
Frequency Required :50 – 60 Hz
Hot-Plug :Hot-plug
Installed Qty :1
Max Supported Qty :2
Nominal Voltage :AC 120/230 V
Power Provided :715 Watt
Power Redundancy :Optional
Type :Internal power supply
RAM
Installed Size :8 GB
Reviews
There are no reviews yet.