AIR-AP4800-Z-K9 Technical Specification
Cisco Aironet wireless access point
General
Device Type Wireless access point
Ruggedized Design Indoor
Width 8.7 in
Depth 9.8 in
Height 2.9 in
Weight 5.51 lbs
Localization Australia, New Zealand, Brazil
Processor / Memory / Storage
RAM 1 GB
Flash Memory 256 MB
Networking
Form Factor External
Connectivity Technology Wireless
Data Transfer Rate 5.2 Gbps
Data Link Protocol IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac Wave 2
Frequency Band 2.4 GHz, 5 GHz
Capacity Spatial streams: 3
Status Indicators Boot state, error, status, operation mode
Features Wi-Fi Multimedia (WMM) support, CleanAir technology, Maximum Ratio Combining (MRC), 4T4R MIMO technology, cyclic shift diversity (CSD), packet aggregation A-MPDU, packet aggregation A-MSDU, ClientLink 4.0 technology, Dynamic Frequency Selection (DFS)
Compliant Standards IEEE 802.11b, IEEE 802.11a, IEEE 802.3ad (LACP), IEEE 802.11d, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, Wi-Fi CERTIFIED, IEEE 802.11h, IEEE 802.11n, IEEE 802.11k, IEEE 802.11ac, IEEE 802.11w, IEEE 802.11r, IEEE 802.11u, IEEE 802.11v, IEEE 802.3bz
Antenna
Antenna Internal
Expansion / Connectivity
Interfaces 2 x 1/2.5/5GBase-T – RJ-45 | 1 x 1000Base-T (auxiliary) – RJ-45 | 1 x management – RJ-45
Miscellaneous
Included Accessories Mounting brackets
Compliant Standards VCCI, ICES-003, FCC Part 15.247, RSS-102, UL 2043, UL 60950-1, IEC 60950-1, EN 60950-1, FCC Part 15.107, FCC Part 15.109, FCC Part 15.407, EN 60601-1-2, ARIB STD-T66, ARIB STD-T71, Directive 93/42/EEC, EN 300 328, FCC OET Bulletin 65c, EN 301 489-1, RSS-247, EN 50155, EN 301 893, CAN/CSA-C22.2 No. 60950-1, EMI Class B, EN 301 489-17
Software / System Requirements
Software Included Cisco Unified Wireless Network Software Release 8.7 or later, Cisco IOS XE 16.9
Environmental Parameters
Min Operating Temperature 32 °F
Max Operating Temperature 104 °F
Humidity Range Operating 10 – 90% (non-condensing)
Reviews
There are no reviews yet.