LN1000-V Juniper Networks LN1000-V router plug in module

18,565.00

LN1000-V Overview

The LN1000-V Mobile Secure Router is an embedded router that operates in both wire-line and wireless environments with communication nodes that are either mobile or stationary. The router provides reliable and secure data, voice, and video services. The LN1000-V processes WAN and LAN routing functions. The router offers multiple DiffServ classes and can interleave lower priority real-time data (voice traffic) with higher priority non-real-time data. It is developed on 3U compact node slot interface (VITA) architecture as defined in the VITA 46.0 IEEE 1101.2 specifications and runs Junos OS for routing, forwarding, and security.

SKU: LN1000-V Category: 1

LN1000-V Technical Specifications

Juniper Networks LN1000-V router plug in module

Manufacturer :Netscreen
Brand :Juniper, Juniper Networks
Product Line :Juniper Networks
Model :LN1000-V
Packaged Quantity :1
Performance
Performance :Forwarding performance (64-byte packet size): 500 Kpps, Firewall throughput (64-byte packet size): 200 Kpps, VPN throughput (256-bit AES+SHA1 IPSec): 250 Mbps, Connection rate: 9000 connections per second, IPS throughput: 250 Mbps, 3DES+SHA1 VPN performance (large packets): 250 Mbps
Capacity
Capacity :BGP routes: 64000, BGP peers: 32, Maximum number of policies: 4096, RIP instances: 20, Maximum number of users: unlimited, BGP instances: 20, VPN tunnel interfaces: 128, OSPF routes: 64000, Concurrent sessions: 128000, OSPF instances: 20, IPSec VPN tunnels: 1000, RIP routes: 64000, Virtual interfaces (VLANs): 512, Concurrent VPN tunnels: 1000, Static routes: 64000, Security zones: 32
Networking
Type :Router
Form Factor :Plug-in module
Connectivity Technology :Wired
Integrated Switch :8-port switch
Data Link Protocol :Gigabit Ethernet, Ethernet
Routing Protocol :DVMRP, IGMPv3, IGMPv2, GRE, IGMP, VRRP, MLD, PIM-SSM, RIP-2, BGP, OSPFv2, Static IP routing, OSPFv3, Policy-based routing (PBR), PIM-DM, MPLS, ECMP, PIM-SM, IS-IS
Remote Management Protocol :IPMI 1.5, CLI
Key Features :Firewall, VPN support
Features :Quality of Service (QoS), PAT support, VPN support, DiffServ support, DHCP relay, Static IP mode, Neighbor Discovery Protocol (NDP), DoS attack prevention, DHCP server, Access Control List (ACL) support, IPv4 support, Content filtering, Policy based access control, NAT support, Intrusion Detection System (IDS), Intrusion Prevention System (IPS), Firewall protection, DDos attack prevention, Weighted Round Robin (WRR) queuing, IPv6 support
Compliant Standards :IEEE 802.1p
Interface Provided
Interfaces :Management: 1 x RS-232 – RJ-45, 8 x 1000Base-T – RJ-45
Power Device
Power Consumption Operational :35 watt
System Requirements
OS Required :JUNOS
Miscellaneous
Height (Rack Units) :3
Encryption Algorithm :MD5, DES, SHA-1, PKI, 256-bit AES, Triple DES
Authentication Method :XAUTH authentication, RADIUS
Compliant Standards :EN 61000-4-2, ANSI/VITA 46.0-2007, MIL-STD-810F
Dimensions & Weight
Width :0.9 inch
Depth :6.3 inch
Height :3.9 inch
Environmental Parameters
Min Operating Temperature :-40 degree Fahrenheit
Max Operating Temperature :185 degree Fahrenheit
Humidity Range Operating :0 – 95% (non-condensing)

Reviews

There are no reviews yet.

Be the first to review “LN1000-V Juniper Networks LN1000-V router plug in module”

Your email address will not be published. Required fields are marked *

LN1000-V Juniper Networks LN1000-V router plug in module
18,565.00